Configuring ADSL Digicom Router

Configuring ADSL Digicom Router

Connect device or PC to the router via Wireless or Wire.

Open Browser whatever Internet explorer/Chrome/Mozilla and then type 192.168.1.1 in the
address bar.
Put admin in both username & password.
Setup page will open & click on Network & then click on WAN.
Default Route Selection -- Auto.
Click on Select Current ATM VC Table.
VPI-8
VCI-81
Encapsulation-LLC
Channel Mode-PPPoE
Enable NAPT
Enable IGMP
Type username & password (Provided by NTC).
Type -- Continuous
Click on Modify.
Again click on Select Current ATM VC Table.
Click on Save in the bottom of the page
(red color) if not Press on F11 & then click on Save.


Now you can get access to the internet